Description
10 Inch Universal Braced Bed Brackets with Full Screws Pack are suitable for all bed sizes and attach securely to your mattress and base ensemble.
Click here for installation Instructions
WHAT’S IN THE BOX:
2 X BED BRACKETS
6 X COACH SCREWS
6 X BOLTS
6 X NUTS
12 X WASHERS
- HOW TO ASSEMBLE Ensemble Bed Bracket 250mm.
- 1. Turn ensemble base onto side and unscrew two end castors.
- 2. Hold brackets against bed and refit the castor through the slot in the bracket temporarily.
- 3. Place ensemble base into the normal position on the floor to establish position of bracket
in relation to bedhead (we recommend placing the bedhead on the floor rather than having
it suspended as our brackets are not designed to support the full weight of the bed head).
Make small markings in pencil where drill holes will be required for mounting (this may
already be done by your bedding manufacturer). - 4. Remove castor and bracket from ensemble to now mount bracket to bedhead.
- 5. Drill two holes in bedhead where you had marked out previously (this may already be
done by your bedding manufacturer). Screw 2x bolts with washers on each bracket with nuts
on reverse to securely hold bedhead in place. Tighten till firm.
Note: as bedheads can vary in thickness, the bolts supplied may not be the correct length.
Different length bolts are available from your local hardware store. - 6. You can now refit the castor back through the bracket into the base. For extra support,
screw 2x screws into each bracket’s drill holes. - 7. Enjoy a good night’s sleep after successfully fitting your bedhead to ensemble.
