Woodworking Adhesive 6355. D3 Bond.
20 Litres – Cross Linking D3 Bond
A high performance Single Pack Cross Linking PVA dispersion, providing rapid high strength bonds resistant to heat and moisture.. Conforms to BS EN204-Exposure Group D3. ViSCosity Approx. 15000 cps. Ambient and timber temperatures should be above 10 degrees C.
R6355 Crosslinking PVA Adhesive
Roberts R6355 is a high solids water based one part crosslinking PVA which meets the D3/BS EN204 specification. It is designed to bond a wide range of timbers, MDF, particle board and ply and provides rapid high strength bonds resistant to heat and moisture.
Full cure within 5-7 days. Roberts R6355 is an ideal product for bonding tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
Surfaces must be sound, clean, dry, and free from oil, wax, dust and other foreign materials that may affect adhesion. Ensure maximum contact between surfaces for optimum bond strength.
Dry Film: Translucent
Base: Water Based Synthetic Emulsion
Viscosity: 8,000 cps
Clean Up: Warm soapy water
Roberts R6355 may be applied by squeeze bottle, brush or roller. Bonds should be assembled within a few minutes and then tightly clamped or pressed until the adhesive has set. Wipe off adhesive squeeze out immediately after assembly with a dry or slightly damp cloth. Assemblies are best left overnight before moving.
Maximum bond strength is achieved within 48 Hours.
Allow floors 24 hours for the adhesive to cure prior to using.
For optimum shelf life store in tightly closed original containers out of direct sunlight.
Shelf life is 12-14 months from date of manufacture if unopened. Keep container tightly closed. Store Locked up. Keep container away from sources of heat.
Please dispose of empty containers and residue in accordance with your local waste management regulations.
In use, please ensure that Occupational Health and Safety requirements are observed.
Eyes: Irrigate with water for 10 minutes and see a doctor.
Skin: Wash off with warm water and soap.
If swallowed, give plenty of water. Do not induce vomiting. Seek medical attention.
Safety Data Sheet is available upon request.
Clean up equipment and adhesive spills with Warm Soapy water